Product Details:
- Contents:
- 1000 gm Colour Chem Epoxy Resin
- 500 gm Colour Chem Epoxy Hardener
- Mix Ratio: 1:0.5 (1 part resin to 0.5 part hardener)
Curing Times:
- Initial Curing: 8 hours
- Ultimate Curing: 2-3 days
- Usable Time: Approximately 40 ± 15 minutes at room temperature
Key Features:
- Non-Toxic: Made from eco-friendly materials, safe for adults and children.
- Bubble-Free Finish: Achieve a clear finish by stirring slowly and evenly.
- Crystal Clear: Self-leveling and self-degassing properties ensure a smooth, glassy finish that resists scratches, stains, and yellowing.
- Complete Set: Includes everything you need for various resin projects.
Applications:
- Ideal for casting, coating, and artistic endeavors such as:
- Resin jewelry
- Coasters
- Cutting boards
- Artwork coatings
- Note: Not recommended for table tops; intended for arts and crafts only.
Usage Tips:
- Ensure a proper mix for optimal results and avoid bubbles.
- Work within the usable time for the best outcome on your projects.
This epoxy resin kit is perfect for crafters looking to create stunning, durable resin pieces!
4 Simple Steps to Use Colour Chem Epoxy Resin
Step 1: Measure
- Safety First: Wear gloves to protect your hands.
- Pour: Measure the correct ratio of art resin and hardener into a mixing container (1 part resin to 0.5 part hardener).
- Tip: Mix a little more than you think you’ll need to ensure full coverage of your project in one go.
Step 2: Mix
- Stir Thoroughly: Mix the resin and hardener well, scraping the sides and bottom of the container to combine all material.
- Avoid Sticky Spots: Ensure there are no unmixed portions, as these can result in sticky areas that won’t cure.
- Working Time: You have about 45 minutes before the mixture begins to thicken.
Step 3: Pour
- Pour Slowly: After mixing, pour the liquid slowly onto your project, allowing it to spread naturally.
- Fill Edges: As it spreads, let it run to the edges. Use a brush to fill any remaining spots.
- Bubbles: Watch for bubbles rising to the surface. You can pop them for a flawless finish, although many will pop on their own.
Step 4: Wait
- Curing Time: Let your project cure in a dust-free environment.
- 8 hours: Tacky, can apply a second coat if needed.
- 12 hours: Dry to the touch.
- 24 hours: 95% cured.
- 72 hours: Fully cured and ready to use.
Note: This new hardener must be mixed at a 1:0.5 ratio. If the packaging appears larger than the liquid, check the contents carefully.
Reviews
There are no reviews yet.